The BASS 4100 is a sewing system for assembly seams. Can be used for side and inside seams on trousers, sports jackets and skirts. The easy-to-use system guarantees high working productivity with a very short learning time.

You can use a safety seam, double chain stitch seam or overlock seam as the stitch pattern. The beginning and end of the seam are controlled by photocell sensing. An accurately adjustable contour guide ensures consistent seam widths over the entire length of the seam.

The fullness distribution can be adjusted partially by programming. The practically proven device enables smooth changeover from manual sewing, e.g. over the pocket opening, and the automatic sewing of the rest of the seam.

  • Simple selection of the sewing programs
  • Proven combination of manual and automated seam
  • Contour guide working with absolute reliability
  • Powerful sewing head for high sewing speeds
  • Quick learning process
  • Fully overlapping working sequence possible
Program pre-selection:

The pre-programmed seam is selected on the control panel.

Manual working steps:

The contour guide is adjusted to the sewing material. The sewing part is fixed in place with the guide clamp. Difficult sewing sequences, e.g. sharp hip bends or side and slanted pocket seams are guided manually. The automatic sewing process gets initiated after releasing the contour guide.

Automatic sewing process:

The residual seam is sewn in a sewing operation and the chain is automatically separated. Next, the finished sewing part is stacked.

Work ergonomics:

The system is designed as a standing workstation, and can be operated both with a foot switch and a knee switch. The height of the table can be adjusted to the body height of the operator.

Matthias Heyn

+49 (0) 6095 99233-15

matthias.heyn@assag.de